Home > Screen Printing > Printed Electronics > Printed Heaters

Screen Printing Meshes

Hi-R Mesh

SAATI HI-R is a high-modulus, low-elongation monofilament polyester screen printing fabric with a proprietary surface treatment ideal suited to all types of printing.

 

Technical Data Sheet - Global

Hi Bond Plus Mesh

SAATI Hibond Plus is a high tension/low elongation polyester monofilament screen-printing fabric with a “vacuum gas” modified surface to enhance stencil performance, offering added bonuses to the stencil maker and printer alike: time savings and stencil durability.

Technical Data Sheet - Global

HiLo Mesh

Super high modulus monofilament polyester mesh. It was developed specially for tight tolerance printing to fabricate high tech products, including touch screen panels, solar cells, and membrane switches. SAATI uses a special fiber whose polymeric structure gives extraordinary physical & mechanical properties to the product.

Technical Data Sheet - Global

Stainless Steel Wire Cloth

Stainless steel wire cloth for the most demanding high definition printing

Technical Data Sheet - USA

1 / 2

Frames

Rigid Aluminium Frames (USA)

The classic sturdy and lightweight metal option

Technical Data Sheet - USA

Drawbar Frames (USA)

The re-tensionable frame for demanding applications

Technical Data Sheet - USA

Newman Roller Frames (USA)

Easy and reliable re-tensionable frames

Technical Data Sheet - USA

1 / 2

Fabricated Screens (USA)

Pre-Stretched Screens (USA)

For the textile printer who needs to focus on stencil production and printing, SAATI Stretched Screens are produced with the same high quality SAATI mesh that you are already used to.

Technical Data Sheet - USA

Roller Panels (USA)

Fabricated mesh panels cut to size with woven-in locking strips for use with Roller Frames

Technical Data Sheet - USA

1 / 2

Ultrafix CA Series 1-Part Adhesives

Ultrafix CA Adhesives

Clear spreadable adhesive with no mixing, available in three viscosities, that cures instantly with the application of Ultrafix CA Activator (spray can or pump)

Technical Data Sheet - EMEA+USA

Ultrafix CA Activators

Activator for freshly applied Ultrafix CA Series adhesives

  • Instantly cure Ultrafix CA adhesives
  • Immediately enter the next step of the screen making process
  • Available in both Spray and Pump

Technical Data Sheet - EMEA+USA

Ultrafix CA Remover

Gel that causes Ultrafix Series adhesives to de-bond from screen frames and also hard surfaces
  • Remove Ultrafix adhesive residue from screen printing frames and other hard surfaces
  • Available in liquid and convenient gel form

Technical Data Sheet - EMEA+USA

1 / 2

Ultrafix SB Frame Adhesives

Ultrafix SB2 Plus

Blue two component polyurethane adhesive with a 30-50 minute mixed pot life to be mixed in small quantities as required, very high initial adhesion

Technical Data Sheet - EMEA+USA

Ultrafix SB3 Plus

Two component polyurethane adhesive with a 48 hour mixed pot life for maximum workflow flexibility, good initial adhesion

Technical Data Sheet - EMEA+USA

Ultrafix SB4 Plus

Red two component polyurethane adhesive with a 30-50 minute mixed pot life with maximum initial adhesion. Cures much more quickly when sealed with SAATI Finish WU-2

Technical Data Sheet - EMEA+USA

Ultrafix SB5 Plus

Red two component polyurethane adhesive with a 30-50 minute mixed pot life with maximum initial adhesion

Technical Data Sheet - EMEA+USA

Ultrafix SB9 Plus

Red two component polyurethane adhesive with a flexible 4-5 hour mixed pot life and good initial adhesion

Technical Data Sheet - EMEA+USA

1 / 2

Screen Stretching Equipment

SAATI Top 12 Plus Clamps

The SAATI Top 12 Plus Clamp provides optimum pneumatic screen tensioning. This highly advanced yet easy to use modular system achieves the highest recommended tensions more uniformly, without over-tensioning the corners.

Technical Data Sheet - Global

SAATI Stretch Manual

The SAATI Stretch Mechanical provides the highest reliability and control of any mechanical stretching system. Among the most notable features are its independent warp/weft tensioning capability and self-standing configuration that eliminates the need for a table or external power requirements.

Technical Data Sheet - USA

1 / 2

Mesh Prep & Degreasers

Direct Prep 1

Apply Direct Prep 1 to newly stretched screens in order to clean the mesh and create a uniform surface for more consistent coating, while roughening the mesh surface in order to enhance the grip of emulsion and films.

Technical Data Sheet - USA+EMEA

Direct Prep 2

Two component polyurethane adhesive with a 48 hour mixed pot life for maximum workflow flexibility, good initial adhesion

Technical Data Sheet - USA+EMEA

Direct Prep 3

Red two component polyurethane adhesive with a 30-50 minute mixed pot life with maximum initial adhesion. Cures much more quickly when sealed with SAATI Finish WU-2

Technical Data Sheet - EMEA+USA

Direct Prep 3 NF / LF

No / Low Foam concentrated degreaser & wetting agent formulated for use in automated screen cleaning equipment

Technical Data Sheet - EMEA

Technical Data Sheet - USA

Direct Prep 4

Direct Prep 4 is a powerful cleaning agent that can be used on new or recycled mesh, or even hard surfaces in the screen department

Technical Data Sheet - Global

1 / 2

Stencil Film

SCF Film

Fast exposing solvent and water-resistant capillary film. Exposes three times faster than comparable diazo film. Long shelf life. Easy to reclaim. Can be used with solvent based, UV-Cured, plastisol and water-based inks.

Technical Data Sheet - Global

DCF Film

SAATI DCF Series Capillary Film is designed for use with all solvent based inks. It varies in color depending on micron thickness and comes in six different thicknesses.

Technical Data Sheet - Global

DCF Supersharp Film

Developed to meet the needs of the industrial printing market, specifically manufacturers of touch screen displays and solar cells, as well as membrane switches and graphic overlays. Provides wide exposure latitude with the sharpest edge definition, and boasts exceptional resistance to the aggressive solvents used during on-press cleaning.

Technical Data Sheet - Global

1 / 2

Dual-Cure Emulsion: SAATIgraf + Grafic

Grafic HU / HU Violet

  • Dual-cure direct emulsion for printing UV-cured, plastisol, solvent-based and water-based inks - general graphics printing
  • Excellent print definition on any mesh
  • 39% solids content
  • Low friction stencil surface prints fine details cleanly and improves durability when used with abrasive inks

Grafic HU Violet TDS - EMEA+China

Grafic HU TDS - Global

Grafic HU4

  • Dual-cure direct emulsion for printing UV cured, plastisol, solvent-based, and water based inks for general industrial and display graphics & half-tone printing
  • Excellent print definition on any mesh
  • 37% solids content
  • Versatile dual-cure emulsion for use in most graphics applications

Grafic HU4 TDS - Global

SAATIgraf HS8

  • Faster exposing blue/green dual-cure emulsion for CtS graphics stencil making
  • Maximum resolution and good edge definition for industrial printing applications
  • Suitable for use with both synthetic and stainless steel wire mesh
  • Excellent resistance to solvent-based, UV-Cured, two-part, and plastisol inks
  • Fast exposure (for a dual-cure) with wide exposure latitude and easy developing
  • Very good solvent resistance and easy reclaiming
  • Designed specifically for use with SAATI LTS laser direct exposure system to maximize stencil quality

SAATIgraf HS8 TDS - Global

SAATIgraf HS3

  • Blue or Violet dual-cure emulsion resistant to UV-cured and solvent-based inks for general industrial, display graphics and half-tone printing
  • Excellent print definition on any mesh
  • Superior solvent, water & ambient moisture resistance
  • Easy to reclaim
  • Economically priced dual-cure emulsion

SAATIgraf HS3 TDS - EMEA+CHINA

1 / 2

Computer-to-Screen Emulsion: SAATIgraf + Grafic

SAATIgraf CTS7

  • Blue, one part, fast exposing SBQ photo emulsion designed for use with computer to screen direct exposure systems
  • Highly solvent-resistant and super easy reclaiming
  • Designed for use with all solvent-based and UV-Cured inks
  • Exposes 4 times faster than diazo or dual-cure emulsions
  • Super easy to reclaim, no pressure washer required
  • High resolution and definition for a wide exposure latitude
  • 38% solids & medium viscosity for optimum coating quality & stencil performance

SAATIgraf CTS7 TDS - Global

SAATIgraf CTS11

  • Blue, one part, fast exposing SBQ photo emulsion designed for use with computer to screen direct exposure systems
  • Highly solvent-resistant and super easy reclaiming
  • Designed for use with all solvent-based, UV-Cured inks & Plastisol inks
  • Exposes 10 times faster than diazo or dual-cure emulsions
  • Super easy to reclaim, no pressure washer required
  • High resolution and definition for a wide exposure latitude
  • 40% solids & medium viscosity for optimum coating quality & stencil performance

SAATIgraf CTS11 TDS - EMEA+USA

1 / 2

Coating Equipment

ProCoat 25x36

The leading flexible, programmable & automated machine for coating 1 or 2 medium/small screens

ProCoat 25x36 - USA

Automated Scoop Troughs

Anodized Aluminum Scoop Troughs for automated coating machines

ProCoat Scoop Troughs - USA

1 / 2

Drying Equipment

Elite Dryer

Thermostat drying chamber compatible with most rolling screen racks

SAATI Elite Dryer TDS - USA

SAATI Pro Drying Racks

Space saving portable screen storage

SAATI Pro Drying Racks

1 / 2

SAATI LTS

LTS 6080

The original glass down model with a 60x80cm / 23.5x31.5” total image area.

LTS 6080 TDS - USA

LTS 6012

Glass-free vertical unit with a 60x120cm / 23.5x47.2” image area: also processes 2 standard textile frames at once (58x78cm / 23x31”)

LTS 6012 TDS - USA

LTS 8012

Glass-free vertical unit with an 80x120cm / 31.5x47.2” image area: also processes 2 larger standard textile frames at once (64x91cm / 25x36”)

LTS 8012 TDS - USA

LTS 1015

The largest model in the glass-free 1st gen vertical range, with a 100x150cm / 39.4x59.1” image area: also processes 2 larger standard textile frames at once (64x91cm / 25x36”)

LTS 1015 TDS - USA

LTS 8012 HD

The enhanced vertical 8012 unit with reinforced mechanical and structural features, support for 5080 DPI input resolution and independent frame clamping controls.

80x120cm / 31.5x47.2” image area: also processes 2 larger standard textile frames at once (64x91cm / 25x36”)

LTS 8012 HD TDS - USA

1 / 2

CST Imaging & Exposure

CST DLE Smart

For the electronics printer that must work with high definition art files but wants to avoid the costs and production delays that come with film positives, CST is launching the CST DLE Smart.

This machine pairs a 48W long-lasting laser light source with 1920 x 1080 DMD chip technology and autofocus function to accurately image & expose high definition images with input resolution up to 25,400 DPI - without film positives.

CST Brochure

CST DLE Vertical

The flagship vertical model, in sizes from 1.0m x 1.0m up to 8.0 x 3.0m. Resolutions range from 508 to 2,400 dpi. Screens of various weights are front-loaded, and the system is also compatible with in-line developing.

CST Brochure

CST DLE New Compact

This vertical one-piece system is considered “plug-in and play,” with a reduced installation time. The standard configurations are for screens 1 x 1m to 1.5m x 1.5m, with larger systems on special request.

The resolutions vary between 1,000dpi and 2,540dpi.

This system is also often ordered as a side-loading semi-automatic version or as a complete in-line version. Otherwise it loads from the front or sides, saving space.

CST Brochure

1 / 2

Pro-Lite Exposure

SAATI Pro-Lite 450 SCX

The exposure unit powered by SAATI Pro-Lite LED technology

SAATI Pro-Lite 450 SCX TDS - Global

SAATI Pro-Lite 450 Exposure Lamp

The sustainable targeted wavelength LED exposure lamp with super low energy requirements

SAATI Pro-Lite 450 Exposure Lamp TDS - Global

1 / 2

Screen Washing Equipment

Pro Washout Booth

High quality washout booth for both developing and reclaiming screen.

SAATI Pro Washout Booth TDS - USA

Elite Washout Booth

Premium quality washout booth for both developing and reclaiming screen.

SAATI Elite Washout Booth TDS - USA

Drum Dispensing Unit

High efficiency pneumatic pump system that practically eliminates refill downtime and lessens the hand fatigue stemming from manual spray bottles.

Drum Dispensing Unit TDS - USA

Screen Scrubber Pads

  • Highly chemically resistant brush surface for the application or spreading of every type of screen printing chemical before and after printing
  • White plastic handle is fused to the brush without any adhesives
  • Fusion of handle to brush means that no chemical can debond the pad from the handle
  • Heavy duty handle encourages a motion that doesn’t put stress on the wrist joint
  • High chemical resistance makes the scrub pad compatible with even the harshest haze/ghost removers

Screen Scrubber Pads TDS - USA

1 / 2

Blockouts & Screen Sealers

Finish S1

Red, medium viscosity solids-resistant blockout

SAATI Finish S1 TDS - Global

Finish S2

Blue, medium viscosity solvent-resistant blockout

SAATI Finish S2 TDS - Global

Finish S3

Blue, high viscosity solvent-resistant blockout

SAATI Finish S3 TDS - Global

Finish WU2 A&B

Red, solvent-resistant screen filler that also accelerates polyurethane adhesive curing times

SAATI Finish WU2 A&B TDS - USA+EMEA

1 / 2

Frame Tapes

Pro Block Tape

5.5 mil acrylic adhesive resists typical solvents

Pro Block Tape TDS - Global

Red Polyken Tape

8 mil red polyethylene tape with natural rubber adhesive

Red Polyken Tape TDS - Global

Cloth Backed Adhesive Tape

12 mil white polyethylene tape with natural rubber adhesive

Cloth Backed Adhesive Tape TDS - Global

Blue/White Split Liner Tape

Polyethylene tape with two halves of high/low adhesive for blocking corners and easy removal

Blue/White Split Liner Tape TDS - Global

Full Adhesive Tape

The full high adhesive version of Split Liner Tape

Blue/White Split Liner Tape TDS - Global

Dual Tack Pallet Tape

Protect your pallets and adhere your substrates with double sided pallet tape

Dual Tack Pallet Tape TDS - Global

4350 Pallet Tape

Protect your pallets and adhere your substrates with double sided pallet tape

4350 Pallet Tape TDS - Global

1 / 2

Quality Control Devices

Yellow LED Safelight Bulbs

Yellow LED Safelights permit you to brightly illuminate the areas where you store, transport and prepare screens for exposure. With a light “airlock” it’s possible to work comfortably without compromising stencil quality. SAATI Yellow LED Safelights are the preferred solution

Yellow LED Safelight Bulbs TDS - Global

Safe Light Goggles

Safe light goggles are an essential tool for every screen printing business. Safe light goggles ignore the wavelengths that are safe for unexposed stencil material and only allow the wearer to see in the wavelengths that do affect them. Instantly verify the presence or absence of unsafe light wavelengths in the areas where you store, transport and prepare to expose unexposed screens, so you can take decisive action with Safe lighting as needed.

Safelight Goggles TDS - Global

Mesh Counter

Accurately count the number of threads per inch within +/-2 in mesh counts ranging from 22-528 TPI.

This is accomplished by placing one of the 2 included films (22-276 TPI and 274-528 TPI) onto your fabric and rotating the film until the moire pattern appears next to the mesh count.

Mesh Counter TDS - Global

Digital Tension Meter

Confirm the tension of your mesh during stretching, and at all subsequent stages to avoid printing with under-tensioned screens

Digital Tension Meter TDS - Global

Angle Determiner

Use gauge by laying it directly on the screen or film. A moiré pattern appears on the tool at the angle it sees.

Angle Determiner TDS - Global

Newman Tension Meter

The only analog tension meter in the world with all stainless steel hardened gears, and shock-proof industrial-grade internal gear movement

Newman Tension Meter TDS - Global

Positector 6000 Thickness Gauge

Use this digital gauge to measure the EOM of your screens prior to exposure so that your exposure program and eventual ink deposits will be correct

Positector 6000 Thickness Gauge TDS - USA+EMEA

Positector DFT Thickness Gauge

Use this digital gauge to measure the EOM of your screens prior to exposure so that your exposure program and eventual ink deposits will be correct

Positector DFT Thickness Gauge TDS - Global

Roughness (Rz) Meter

Use this digital gauge to measure the peaks and valleys of your stencil surface to understand if the surface is too rough or too smooth to create precise ink deposits

Roughness (Rz) Meter TDS - USA+EMEA

TQM Aquacheck

When diazo/dual-cure stencils are moist and are exposed in that condition, they suffer from loss of resolution, and any moist screen can also stick to vacuum glass. With a Moisture Meter, it is simple and quick to confirm that a coated screen is fully dried before subjecting it to an exposure program.

TQM Aquacheck TDS - Global

Spectrophotometer

This small, light weight portable spectrophotometer is designed for easy operation and high precision for a variety of functions. It measures the wavelength and output interval of light sources in your screenmaking area - both the exposure equipment and ambient lighting

Spectrophotometer TDS - Global

21 Step Guide

SAATI’s 21 Step Guide is a day one priority for every screen printer across every application. This small tool is applied to the stencil material prior to exposure, and when developed tells you whether the stencil has over or under exposure, or is dialed in for the best print quality. Count the number of progressively darker steps of the calculator that have adhered to the mesh, and make one simple calculation to prepare a second test and confirm perfect stencil curing.

Take it one step further and apply the calculator to every screen you produce - you will know with certainty that every screen going to press is dialed in for high resolution and durability.

21 Step Guide TDS - Global

Exposure Calculator

This handy guide is fixed to emulsion prior to exposure and upon developing reveals resolution and definition for 4 progressively shorter exposure times – 70%, 50%, 33% and 25% of the actual test. Compare the results between steps to make an informed decision about what result matches your exact needs.

Exposure Calculator TDS - Global

Rex H-1000 Durometer Gauge

A compact and simple to read tool that confirms squeegee hardness for blades without a stated value, it also helps you identify squeegee that have softened, so you always go to press with the right blade for accurate printed results.

Rex H-1000 Durometer Gauge TDS - Global

ViTiny 300 Plus Microscope

This powerful handheld microscope allows you to check your halftones on substrates, to check whether details have narrowed or closed prior to printing, and to check the quality of the edge definition with up to 200x magnification

ViTiny 300 Plus Microscope TDS - Global

1 / 2

Duralife Squeegee

Duralife CE Cut Edge Squeegee

Resistant to both chemicals and abrasion making them suitable for all applications.

Duralife CE TDS - EMEA

Duralife CE TDS - USA

Assembled Duralife CE Cut Edge Squeegee

SAATI offers squeegee already installed into handles in either wood or extruded aluminium. Save set up time and a decision making step with our optimized handles rigorously tested for dependability and comfort on long print runs.

Duralife CE Assembled Squeegee TDS - USA

Duralife ME Molded Edge Squeegee

The only squeegee cast in individual cavity molds for the highest and resist both softening and nicking for longer than other products.

Duralife ME TDS - EMEA

Duralife ME TDS - USA

Duralife HP / MSR Molded Edge Squeegee

Premium squeegee for the most aggressive UV & solvent-based inks and demanding high speed automated printing like electronics and glass.

Duralife HP TDS - EMEA

Duralife MSR TDS - USA

1 / 2

Press Wash

Remove PW1 Universal Product

  • Fastest evaporating press wash
  • Works on most inks
  • VOC free

Remove PW1 TDS - USA

Remove PW7 Universal Product

  • Recommended for use with Solvent based, UV-Cured inks and 2-part inks
  • Flash point 43ºC/110ºF
  • Fast drying product that is highly effective on difficult to clean inks
  • Can be used to remove pallet adhesives on press

Remove PW7 TDS - Global

Remove PW13 Universal Product

  • Press wash recommended for use with Solvent-Based, UV-Cured and Textile inks
  • Flash point 62ºC/143ºF
  • Contains no chlorinated solvents or toxic organic substances
  • Compatible with automatic cleaning machines
  • When used in automatic machines can be recycled through the vacuum distillation process
  • Slower drying product that is highly effective on difficult to clean inks

Remove PW13 TDS - EMEA

Remove PW30 Universal Product

  • Recommended for use with Solvent-Based, UV-Cured and Textile inks
  • Flash point 43ºC/109ºF
  • Compatible with automatic cleaning machines
  • When used in automatic machines can be recycled through the vacuum distillation process
  • Mild Scent

Remove PW30 TDS - EMEA

Remove PW36 Universal Product

  • Recommended for use with Solvent-Based, UV-Cured and Textile inks
  • Flash point 43ºC/109ºF
  • Compatible with automatic cleaning machines
  • When used in automatic machines can be recycled through the vacuum distillation process
  • Mild Scent

Remove PW36 TDS - EMEA

Remove PW40 Universal Product

  • Recommended for use with Solvent-Based, UV-Cured and Textile inks
  • Flash point 43ºC/109ºF
  • Compatible with automatic cleaning machines
  • When used in automatic machines can be recycled through the vacuum distillation process

Remove PW40 TDS - EMEA

Remove PW2 Graphics Product

  • Recommended for use with solvent based and UV-Cured inks
  • Flash point 43ºC/109ºF
  • Versatile and with fast drying formula

Remove PW2 TDS - USA

Remove PW5 Graphics Product

  • Recommended for use with Solvent based, UV-Cured inks and 2-part inks
  • Flash point 165ºC/329ºF
  • Slower drying product that is highly effective on difficult to clean inks

Remove PW5 TDS - USA

Remove PW6 Graphics Product

  • Recommended for use with Solvent based, UV-Cured inks and 2-part inks
    Flash point 44ºC/112ºF
    Fast drying product that is highly effective on difficult to clean inks

Remove PW6 TDS - USA

Remove PW8 Compliance Product

  • Recommended for use on all inks
  • Flash point >94ºC/>200ºF
  • Low VOC at 90g/L and complies with SCAQMD regulations
  • Non-flammable

Remove PW8 TDS - Global

1 / 2

Ink Removers

Remove IR6 Universal Product

  • Flash Point 148ºF (64ºC)
  • For manual or automatic cleaning
  • Emulsifies for easy water rinsing and avoids formation of ghost images
  • High efficiency formula reduces product consumption
  • Universal performance reduces the need for multiple ink removers

Remove IR6 TDS - Global

Remove IR10 Universal Product

  • Flash Point 150ºF (66ºC)
  • Safe to use on emulsions that are plastisol resistant only
  • Will not attack SAATI Chemicals CA Series Adhesives

Remove IR10 TDS - Global

Remove IR11 Universal Product

  • Flash Point 175ºF (79ºC)
  • For manual or automatic cleaning
  • Emulsifies for easy water rinsing and avoids formation of ghost images
  • High efficiency formula reduces product consumption
  • Universal performance reduces the need for multiple ink removers
  • Can be re-applied after stencil removal to remove ghost images

Remove IR11 TDS - Global

Remove IR18 Universal Product

  • Flash Point >200ºF (93ºC)
  • Low foam & low odor and can be used for manual or automatic cleaning
  • Can be mixed with Remove ER6 and used as one-step ink & stencil remover solution
  • Emulsifies for easy water rinsing and avoids formation of ghost images
  • High efficiency formula reduces product consumption
  • Universal performance reduces the need for multiple ink removers
  • Can be re-applied after stencil removal to remove ghost images

Remove IR18 TDS - Global

Remove IR26 Universal Product

  • Flash Point >200ºF (93ºC)
  • Low foam & low odor and can be used for manual or automatic cleaning
  • Can be mixed with Remove ER6 and used as one-step ink & stencil remover solution
  • Emulsifies for easy water rinsing and avoids formation of ghost images
  • High efficiency formula reduces product consumption
  • Universal performance reduces the need for multiple ink removers
  • Can be re-applied after stencil removal to remove ghost images

Remove IR26 TDS - Global

Remove IR27 Universal Product

  • Flash point >200ºF (93ºC)
  • Lower foam & low odor and can be used for manual or automatic cleaning
  • Can be mixed with Remove ER products and used as one-step ink & stencil remover solution
  • Emulsifies for easy water rinsing and avoids formation of ghost images
  • Eliminates mesh stains when used to remove plastisol inks
  • High efficiency formula reduces product consumption
  • Universal performance reduces the need for multiple ink removers
  • Can be re-applied after stencil removal to reduce ghost images

Remove IR27 TDS - Global

Remove IR29 Universal Product

  • Flash point >200ºF (93ºC)
  • No foam & low odor and can be used for manual or automatic cleaning
  • Can be mixed with Remove ER products and used as one-step ink & stencil remover solution
  • Emulsifies for easy water rinsing and avoids formation of ghost images
  • High efficiency formula reduces product consumption
  • Universal performance reduces the need for multiple ink removers
  • Can be re-applied after stencil removal to reduce ghost images

Remove IR29 TDS - Global

Remove IR32 Universal Product

  • Universal ink remover for both manual and automatic cleaning
  • Economical formula
  • Emulsifies for easy water rinsing and avoids formation of ghost images
  • High efficiency formula reduces product consumption
  • Universal performance reduces the need for multiple ink removers
  • Can be re-applied after stencil removal to remove ghost images
  • Low odor

Remove IR32 TDS - Global

Remove IR33 Universal Product

  • Flash point >200ºF (93ºC)
  • No foam & low odor and can be used for manual or automatic cleaning
  • Can be mixed with Remove ER products and used as one-step ink & stencil remover solution
  • Emulsifies for easy water rinsing and avoids formation of ghost images
  • High efficiency formula reduces product consumption
  • Universal performance reduces the need for multiple ink removers
  • Can be re-applied after stencil removal to reduce ghost images

Remove IR33 TDS - USA

Remove IR1 Graphics Product

  • For graphics, containers, electronics, industrial and glass ink removal
  • Flash Point 150ºF (66ºC)
  • Removes the most stubborn and harshest inks
  • Highly effective and can be reapplied to remove ghost image after stencil removal

Remove IR1 TDS - Global

Remove IR17 Universal SCAQMD Product

  • Universal ink remover
  • Flash Point >200ºF (93ºC)
  • Non-flammable
  • Zero VOC at 0g/L and complies with SCAQMD regulations
  • High efficiency formula reduces product consumption
  • Universal performance reduces the need for multiple ink removers
  • Highly effective and can be reapplied to remove ghost image after stencil removal

Remove IR17 TDS - Global

Remove IR23 Universal GOTS Certified Product

  • Universal ink remover recommended for use with Solvent-Based, UV-Cured and Textile inks
  • Flash Point >80ºC / 176ºF
  • Contains no chlorinated solvents or toxic organic substances
  • GOTS-certified
  • When used in automatic machines can be recycled through the vacuum distillation process
  • Mild Odor

Remove IR23 TDS - Global

Remove IR24 Universal Biodegradable Product

  • Universal ink remover recommended for use with Solvent-Based, UV-Cured and Textile inks
  • Flash Point >80ºC / 176ºF
  • Contains no chlorinated solvents or toxic organic substances
  • GOTS-certified
  • When used in automatic machines can be recycled through the vacuum distillation process
  • Mild Odor

Remove IR24 TDS - Global

1 / 2

Emulsion Removers

Remove ER4 Ready-Use Gel

  • Ready to use gel emulsion remover
  • Easy to apply by brush
  • Smooth gel that spreads easily and stays put, for maximum effectiveness
  • Contains built in degreaser that cuts through any ink/solvent residue to ensure fast and efficient stencil removal

Remove ER4 TDS - USA+EMEA

Remove ER1 Powder for Dilution

  • Concentrated emulsion remover powder that dissolves in water to produce stencil stripper solution
  • Economical
  • Highly concentrated product
  • Recommended to be dissolved at 1% by weight in water for full strength working solution for spray application

Remove ER1 TDS - USA+EMEA

Remove ER2 Concentrated Liquid

  • Liquid concentrated emulsion remover that includes powerful built-in degreaser
  • Dilute 1:35 by volume, or 1:25 by weight to provide full strength working solution for spray application
  • Very easy to dissolve and will not crystallize
  • Degreaser cuts through any greasy film left after ink removal and this ensures fast and efficient stencil removal

Remove ER2 TDS - USA+EMEA

Remove ER5 Concentrated Liquid

  • Liquid concentrated emulsion remover that mixes 1 part product with 4 parts water
  • Economical product for spray application
  • Very easy to dissolve and will not crystallize

Remove ER5 TDS - USA+EMEA

Remove ER10 Concentrated Liquid

  • Economical
  • Most concentrated liquid reclaimer
  • Dilutes 1:80 by volume or 1:50 by weight to make full strength working solution for spray application
  • Can be diluted up to 300:1 by volume or 200:1 by weight, depending on requirements for use in automated screen recycling systems
  • Will not crystallize or block spray nozzles

Remove ER10 TDS - USA+EMEA

Remove ER13 Concentrated Liquid

  • Super concentrated liquid emulsion remover
  • Economical
  • Highly concentrated liquid reclaimer
  • Dilutes 1:40 by volume or 1:25 by weight to make a full strength working solution for spray application
  • Can be diluted up to 150:1 by volume or 100:1 by weight, depending on requirements for use in automated screen recycling systems
  • Will not block spray nozzles

Remove ER13 TDS - USA+EMEA

Remove ER25 Concentrated Liquid

  • Super concentrated liquid emulsion remover
  • Economical
  • Highly concentrated liquid reclaimer
  • Dilutes 1:40 by volume or 1:25 by weight to make a full strength working solution for spray application
  • Can be diluted up to 150:1 by volume or 100:1 by weight, depending on requirements for use in automated screen recycling systems
  • Will not block spray nozzles

Remove ER25 TDS - USA+EMEA

Remove ER26 Concentrated Liquid

  • Low cost liquid concentrated emulsion remover with built-in degreaser
  • Dilute 1:25 with water to provide working solution
  • Easy to dissolve and will not crystallize
  • Removes all types of emulsion or capillary film stencils

Remove ER26 TDS - Global

Remove ER6 Combo Product

  • Concentrated emulsion remover used for dip tank reclaiming of textile screens
  • Mix 1:10 with water for optimum results
  • When mixed with SAATI Remove IR18, the solution is used as one-step process for ink and stencil removal
  • Long lasting and economical

Remove ER6 TDS - USA+EMEA

Remove ER6 Plus Combo Product

  • Emulsion remover concentrate that is mixed with Gelative ER6, to make a reclaiming gel for textile screens
  • Mix 1:1 with Gelative ER6 for optimum results as spray on ‘dip tank in a bottle’ process
  • Easily applied by spray, or brush, and allows for batch reclaiming of multiple screens
  • Stays put where applied for maximum effectiveness
  • Fast acting and economical, no waste

Remove ER6 Plus TDS - Global

Gelative ER6 Combo Product

  • Produces clear stable gel when mixed with Remove ER6/ER6 Plus and removes ink and emulsion in one easy step
  • Works with all photo emulsions and capillary film
  • Clings to screen for maximum efficiency
  • Boosts cleaning power to minimize ghost image

Gelative ER6 TDS - Global

1 / 2

Haze Removers

Remove HR2 Liquid Product

  • Ready to use liquid haze remover
  • Removes the toughest stains
  • Works in minutes
  • Viscous cling to prevent run off and minimize waste
  • Powerful formula is able to remove older stains

Remove HR2 TDS - Global

Remove HR5 Liquid Product

  • Powerful ready to use liquid haze remover
  • Removes the toughest stains
  • Works in minutes
  • Viscous cling to prevent run off and minimize waste
  • Works without the irritation and ‘bite’ normally associated with high caustic products

Remove HR5 TDS - Global

Remove HR12 Liquid Product

  • Ready to use liquid haze remover
  • Remove the toughest stains
  • Works in minutes
  • Low odor during use with pressure washer
  • Viscous cling to prevent run off and minimize waste
  • Powerful formula is able to remove older stains
  • Designed to work on both wet or dry screens

Remove HR12 TDS - USA+EMEA

Remove HR1 Gel Product

  • Ready to use gel designed to remove diazo stains
  • Combine with Remove IR for improved ink removal
  • Can be left to dry on mesh and then reactivated with solvent for simplified batch cleaning of screens
  • Low caustic formula will not pop screens

Remove HR1 TDS - USA+EMEA

Remove HR3 Gel Product

  • Ready to use haze remover paste
  • Strong yet gentle on mesh
  • Smooth gel spreads easily
  • Stable formula does not separate or darken
  • Will not separate in can when used with wet brush

Remove HR3 TDS - USA+EMEA

Remove HR9 Gel Product

  • Powerful fast acting gel that works in minutes
  • One part, ready to use formula removes the toughest stains
  • Low odor during use with pressure washer
  • Fast and easy application with stainless steel scoop coater
  • Non-drip and works only where applied

Remove HR9 TDS - USA+EMEA

Remove HR4 Gel Product

  • Ready to use non-caustic gel
  • Designed to remove emulsion and ink residue
  • Apply by scoop coater for easy batch cleaning of screens
  • Can be left on screen for extended periods and will not weaken mesh

Remove HR4 TDS - USA+EMEA

Remove HR6 Stain Remover

  • Pink, semi-viscous liquid/gel
  • Non-caustic
  • Mild cherry scent
  • Effectively removes ink stain from most recent job
  • Mild abrasive formula helps to speed stain removal

Remove HR6 TDS - Global

1 / 2

Hand Cleaners

Remove HC8 Hand Cleaner

  • Pink, viscous, water-based lotion
  • Pleasant cherry scent
  • Moisturizes skin while cleaning inks, oils and more
  • Contains medium-grit abrasive to accelerate the removal of difficult soils

Remove HC8 TDS - Global

Green Apple Hand Cleaner

  • Viscous light green water-based lotion
  • Pleasant green apple scent
  • Moisturizes skin while cleaning inks, oils and more
  • Contains fine-grit abrasive to accelerate the removal of difficult soils

Green Apple Hand Cleaner TDS - Global

1 / 2

Screen Printing Accessories

MBX Tool

The MBX Metal Blaster powers specialized wire brush belts that quickly strip epoxy, mesh and ink from aluminum screen frames. The cleaned surface is perfectly textured for bonding new screen mesh.

MBX Tool TDS - USA

Squeegee Scrapers

Use the squeegee scraper to spread adhesives, blockouts and screen fillers. Available in 2 & 6" widths (5 & 15 cm).

Adhesive Brushes

Brushes for applying polyurethane adhesives during the screen stretching phase.

Screen Cleaning Brushes

Brushes for spreading reclaim chemicals and screen scrubbing.

1 / 2

Latest news

5/28/2025 8:24:26 AM

SAATI sponsors RE-LAKE: the regenerative revolution of Lake Como

SAATI proudly supports RE-LAKE, a groundbreaking project to restore biodiversity in Lake Como through science, sustainability, and local impact. By financing a 1,000 m² underwater meadow, SAATI takes a tangible step toward a regenerative future — right where its story began.

Read more

5/28/2025 8:25:05 AM

SAATI Service Awards: 25 and 30 years of SAATIzens

Each year at its Appiano Gentile headquarters, SAATI hosts the Service Awards Ceremony — a powerful tradition that celebrates employees reaching 25 and 30 years of service. More than a milestone, it’s a tribute to the people who make up the SAATI nation — and a reminder that every contribution, in every department, counts.

Read more

Contact us

We create new innovations by working closely with our clients and listening to their needs. Whether you’re designing a new product or improving an existing one, get in touch today to find out how our dedicated SAATIZENS can help you find the best solution.

Follow us




Thank you for your enquiry.

We aim to come back to you within 2 working days.