SAATI Chemicals

Blue two component polyurethane adhesive with a 30-50 minute mixed pot life to be mixed in small quantities as required, very high initial adhesion

Two component polyurethane adhesive with a 48 hour mixed pot life for maximum workflow flexibility, good initial adhesion

Red two component polyurethane adhesive with a 30-50 minute mixed pot life with maximum initial adhesion

Red two component polyurethane adhesive with a 30-50 minute mixed pot life with maximum initial adhesion

Characteristics

• Two-component polyurethane adhesive
• Red with medium viscosity for coarse to medium mesh counts
• Mounts screen mesh onto aluminum, steel, iron, plastic-coated and wood frames
• Can be thinned with dry acetone for use with higher mesh counts

Features

• Maximum initial adhesion allows screens to be removed from the stretching system only minutes after applying
• Maximum resistance to solvents, heat and automatic cleaning machines

Benefits

• Outperforms all other polyurethane adhesives in adhesion and resistance
• Superior flexibility polyurethane adhesive prevents cracking
• Quicker drying time than other urethane adhesives saves time in stretching

Red two component polyurethane adhesive with a flexible 4-5 hour mixed pot life and good initial adhesion

Clear spreadable adhesive with no mixing, available in three viscosities, that cures instantly with the application of Ultrafix CA Activator (spray can or pump)

Characteristics

• Spray-activated cyanoacrylate adhesives
• Mounts screen mesh onto aluminum, steel, iron, plastic-coated, and wood frames
• Available in three viscosities — Ultrafix CA50, CA100, and CA150

Features

• Cures instantly with spray activation
• Requires no mixing
• Good resistance to water and solvents

Benefits

• Instant cure and no mixing speeds up screen production
• Reaches peak performance immediately upon curing
• Can be removed from stretching system and pressed into production immediately

Activator for freshly applied Ultrafix CA Series adhesives

• Instantly cure Ultrafix CA adhesives
• Immediately enter the next step of the screen making process
• Available in both Spray and Pump

• Remove Ultrafix adhesive residue from screen printing frames and other hard surfaces
• Available in liquid and convenient gel form

Water-based adhesive for holding garments in place during printing with no harmful chemicals

• Water-based pressure-sensitive adhesive
• Superior tack level holds fleece & tees
• Flash safe & non-staining
• Non-flammable & no VOC’s
• NPEO & APEO-free
• Resists breakdown when printing with water based or discharge inks
• Can be thinned with water up to 1:1

Water-based adhesive for holding garments in place during printing with no harmful chemicals

• Economical water-based pressure-sensitive adhesive
• High tack level holds fleece & tees
• Flash safe & non-staining
• Non-flammable & no VOC’s
• NPEO & APEO-free
• Resists breakdown when printing with water based or discharge inks

Water-based adhesive for holding garments in place during printing with GOTS requirements

• Permanent water-based pressure-sensitive adhesive
• High cohesion and medium tacking
• Flash safe & non-staining
• Non-flammable & no VOC’s APEO or Formaldehyde

Apply Direct Prep 1 to newly stretched screens in order to clean the mesh and create a uniform surface for more consistent coating, while roughening the mesh surface in order to enhance the grip of emulsion and films

Use Direct Prep 2 on recycled mesh to clean the mesh and create a uniform surface for a more consistent coating

All of the degreaser & wetting agent benefits of Direct Prep 2 in a 10:1 concentrated formula

No / Low Foam concentrated degreaser & wetting agent formulated for use in automated screen cleaning equipment

Direct Prep 4 is a powerful cleaning agent that can be used on new or recycled mesh, or even hard surfaces in the screen department

• Dual-cure direct emulsion for printing UV-cured, plastisol, solvent-based and water-based inks - general graphics printing
• Excellent print definition on any mesh
• 39% solids content
• Low friction stencil surface prints fine details cleanly and improves durability when used with abrasive inks

• Faster exposure dual-cure emulsion for CtS stencil making
• Green dual-cure emulsion
• Maximum resolution and edge definition
• Suitable for use with stainless steel wire mesh
• Excellent resistance to water-based, solvent-based and UV-cured inks
• Double the exposure speed of normal dual-cures for use in computer-to-screen systems

• Dual-cure emulsion resistant to UV-cured, solvent-based and plastisol inks for general graphics printing
• Excellent print definition on any mesh
• Superior solvent resistance
• Easy to reclaim
• Economically priced dualcure emulsion available as blue, red violet and clear

• Dual-cure direct emulsion for printing UV cured, plastisol, solvent-based, and water based inks for general industrial and display graphics & half-tone printing
• Excellent print definition on any mesh
• 37% solids content
• Versatile dual-cure emulsion for use in most graphics applications

• Faster exposing blue/green dual-cure emulsion for CtS graphics stencil making
• Maximum resolution and good edge definition for industrial printing applications
• Suitable for use with both synthetic and stainless steel wire mesh
• Excellent resistance to solvent-based, UV-Cured, two-part, and plastisol inks
• Fast exposure (for a dual-cure) with wide exposure latitude and easy developing
• Very good solvent resistance and easy reclaiming
• Designed specifically for use with SAATI LTS laser direct exposure system to maximize stencil quality

• Blue or Violet dual-cure emulsion resistant to UV-cured and solvent-based inks for general industrial, display graphics and half-tone printing
• Excellent print definition on any mesh
• Superior solvent, water & ambient moisture resistance
• Easy to reclaim
• Economically priced dual-cure emulsion

• Highly solvent resistant blue dual-cure photoemulsion specially designed for the most demanding industrial printing applications
• Extremely high resolution and definition for optimum microreplication
• 37% solids content, medium viscosity
• Optimal performance when EOM is >10 μm
• Excellent resolution/definition combined with smooth sidewall geometry allows clean and faithful microreplication of highly detailed structures and designs
• Sub-micron dual-cure technology provides optimal mesh bridging and product is designed for use with stainless steel and polyester mesh

• Highly solvent resistant blue dual-cure photoemulsion specially designed for the most demanding industrial printing applications
• Extremely high resolution and definition for optimum microreplication
• 37% solids content, medium viscosity
• Optimal performance when EOM is >15 μm
• Excellent resolution/definition combined with smooth sidewall geometry allows clean and faithful microreplication of highly detailed structures and designs
• Sub-micron dual-cure technology provides optimal mesh bridging and product is designed for use with stainless steel and polyester mesh

• Highly solvent resistant blue dual-cure photoemulsion specially designed for the most demanding industrial printing applications
• Extremely high resolution and definition for optimum microreplication
• 32% solids content, medium viscosity
• Optimal performance when EOM is >15 μm
• Excellent resolution/definition combined with smooth sidewall geometry allows clean and faithful microreplication of highly detailed structures and designs
• Sub-micron dual-cure technology provides optimal mesh bridging and product is designed for use with stainless steel and polyester mesh

• Blue pure photopolymer emulsion for general graphics printing
• Resistant to UV-cured, plastisol and solvent-based ink. Water resistant when post-exposed
• High solids content and medium viscosity for excellent print definition on any mesh
• Easy to reclaim
• Pre-sensitized with no mixing required, long shelf life with consistent performance
• SBQ technology, exposes 4 times faster than two part emulsions and leaves no diazo stains
• Low friction stencil surface for improved durability when used with abrasive inks

• Blue pure photopolymer emulsion for general graphics printing
• Resistant to UV-cured, plastisol and solvent-based ink. Water resistant when post-exposed
• High solids content and medium viscosity for excellent print definition on any mesh
• Exposes 4 times faster than diazo or dualcure emulsions with no mixing required
• Very resistant to solvent and very easy to reclaim
• Make dual-cure quality stencils with 1-part emulsion, and no mixing required, long shelf life & no diazo stains

• Red pure photopolymer emulsion for general graphics printing
• Resistant to UV-cured, plastisol and solvent-based ink. Water resistant when post-exposed
• High solids content and medium viscosity for excellent print definition on any mesh
• Exposes 4 times faster than diazo or dualcure emulsions with no mixing required
• Very resistant to solvent and very easy to reclaim
• Make dual-cure quality stencils with 1-part emulsion, and no mixing required, long shelf life & no diazo stains

• Red pure photopolymer emulsion for general graphics printing
• Resistant to UV-cured, plastisol and solvent-based ink. Water resistant when post-exposed
• Exposes 3 times faster than diazo or dualcure emulsions with no mixing required
• Very resistant to solvent and very easy to reclaim
• Make dual-cure quality stencils with ready-use 1-part emulsion, long shelf life & no diazo stains

• Blue pure photopolymer emulsion for general graphics printing
• Resistant to UV-cured, plastisol and solvent-based ink. Water resistant when post-exposed
• Exposes 3 times faster than diazo or dualcure emulsions with no mixing required
• Very resistant to solvent and very easy to reclaim
• Make dual-cure quality stencils with ready-use 1-part emulsion, long shelf life & no diazo stains

• Universal pure photopolymer emulsion for use with projection exposure equipment
• Excellent resistance to UV-cured, solvent, and water-based ink
• Post-exposure recommended to optimize water resistance for long print runs
• Exposes 20 times faster than diazo or dual cure emulsions
• Easy to reclaim
• High solids content and medium viscosity for high definition stencils on DLE systems
• High exposure speed for high output

• Fast exposing SBQ photo emulsion designed for use with computer to screen direct exposure systems
• Universal pure photopolymer emulsion for use with projection exposure equipment
• Excellent resistance to UV-cured, solvent, and water-based ink
• Easy to reclaim with no diazo stains
• Post-exposure recommended to optimize water resistance for long print runs with water-based UV or poster inks
• Exposes 15 times faster than diazo or dual cure emulsions for high productivity

• Blue, one part, fast exposing SBQ photo emulsion designed for use with computer to screen direct exposure systems
• Highly solvent-resistant and super easy reclaiming
• Designed for use with all solvent-based and UV-Cured inks
• Exposes 4 times faster than diazo or dual-cure emulsions
• Super easy to reclaim, no pressure washer required
• High resolution and definition for a wide exposure latitude
• 38% solids & medium viscosity for optimum coating quality & stencil performance

• Blue, one part, fast exposing SBQ photo emulsion designed for use with computer to screen direct exposure systems
• Highly solvent-resistant and super easy reclaiming
• Designed for use with all solvent-based and UV-Cured inks
• Exposes 4 times faster than diazo or dual-cure emulsions
• Super easy to reclaim, no pressure washer required
• High resolution and definition for a wide exposure latitude
• 38% solids & medium viscosity for optimum coating quality & stencil performance

• Blue, one part, fast exposing SBQ photo emulsion designed for use with computer to screen direct exposure systems
• Highly solvent-resistant and super easy reclaiming
• Designed for use with all solvent-based and UV-Cured inks
• Exposes 8 times faster than diazo or dual-cure emulsions
• Super easy to reclaim, no pressure washer required
• High resolution and definition for a wide exposure latitude
• 38% solids & medium viscosity for optimum coating quality & stencil performance

• Blue, one part, fast exposing SBQ photo emulsion designed for use with computer to screen direct exposure systems
• Highly solvent-resistant and super easy reclaiming
• Designed for use with all solvent-based, UV-Cured inks & Plastisol inks
• Exposes 10 times faster than diazo or dual-cure emulsions
• Super easy to reclaim, no pressure washer required
• High resolution and definition for a wide exposure latitude
• 40% solids & medium viscosity for optimum coating quality & stencil performance

• Highly water resistant diazo emulsion for use with plastisol and water based inks
• 42% solids content and medium viscosity
• Economical emulsion for apparel printing
• Can be hardened with SAATI Fixer 9 to produce a permanent waterproof stencil

• Highly water resistant diazo emulsion for use with plastisol and water based inks in flat textile printing, garment printing
• 41% solids content and medium viscosity
• Most economical emulsion for apparel printing
• Can be hardened with SAATI Fixer 9 to produce a permanent waterproof stencil

• Diazo emulsion for use with plastisol and water based inks
• 42% solids content and medium viscosity
• Faster exposure (60%) than is normally required for this type of emulsion
• Economical emulsion for apparel printing
• Can be hardened with SAATI Fixer 9 to produce a permanent waterproof stencil

• Blue triple-cure emulsion for printing plastisol and water based inks
• High resolution and definition
• Very easy to reclaim before use of hardener
• Can be catalyzed with SAATI Chemicals Fixer 9 to produce a permanent water proof stencil
• 48% solids and high viscosity for easy coating on wide range of mesh counts

• Low odor blue triple-cure emulsion for printing plastisol and water based inks
• High resolution and definition
• Very easy to reclaim before use of hardener
• Can be catalyzed with SAATI Chemicals Fixer 9 to produce a permanent water proof stencil
• 48% solids and high viscosity for easy coating on wide range of mesh counts
• Up to double the exposure speed of Textil HT

• Blue triple-cure emulsion for printing plastisol and water based inks
• High resolution and definition
• Very easy to reclaim before use of hardener
• Can be catalyzed with SAATI Chemicals Fixer 9 to produce a permanent water proof stencil
• 48% solids and high viscosity for easy coating on wide range of mesh counts
• Up to 40% faster curing time compared to Textil HT

• Red pure photopolymer direct emulsion resistant to plastisol ink, abrasion and humidity
• Exposes 8x faster than a diazo or dual-cure emulsion
• 42% solids content and medium viscosity for easy coating and good bridging on wide range of mesh counts
• No mixing required and no diazo staining
• Water resistant when post exposed

• Blue one part pure photopolymer emulsion resistant to plastisol ink, abrasion and humidity
• Exposes 8X faster than typical two part emulsions
• 50% solids content and medium viscosity for fast build up and good bridging on wide range of mesh counts
• No mixing required and no diazo staining of mesh
• Water resistant when post exposed and can be used to print water based inks and adhesives

• Very high speed one part photopolymer emulsion designed for projection imaging in flat continuous textile printing plastisol and water based inks
• 36% solids content and low viscosity
• Exposes 30X faster than typical two part emulsions for maximum productivity with DLE computer to screen systems
• Very good resistance to water based inks and can be used for apparel printing as well as flat textile yard goods
• No chemical hardening required and easy to reclaim

• Emulsion for garment printing with plastisol ink, glitter printing, high-density printing
• Green one part pure photopolymer formula resistant to plastisol and high humidity
• High solids content (50%) and high viscosity 50,000 cPs for production of stencils up to 400 micron thick with simple wet-on-wet coating process
• Exposes 10x faster than typical two part emulsions for fast exposure at high build up

• Emulsion for garment printing with plastisol ink, glitter printing, high-density printing
• Red one part pure photopolymer formula resistant to plastisol and high humidity
• High solids content (50%) and high viscosity 50,000 cPs for production of stencils up to 400 micron thick with simple wet-on-wet coating process
• Exposes 10X faster than typical two part emulsions for fast exposure at high build up

• Red one part pure photopolymer emulsion with universal ink resistance
• Exposes 8X faster than typical two part emulsions
• 45% solids and high viscosity for easy coating and good bridging on all mesh counts
• Universally resistant, can be used with solvent based, UV, and water based inks, yet is easy to reclaim
• Recommended for use with discharge inks as is, without using diazo or catalyst for stencil hardening
• Can be used with Diazo 11 when extra sharpness is required for high resolution

• Blue one part pure photopolymer emulsion with universal ink resistance
• Exposes 8X faster than typical two part emulsions
• 45% solids and high viscosity for easy coating and good bridging on all mesh counts
• Universally resistant, can be used with solvent based, UV, and water based inks, yet is easy to reclaim
• Recommended for use with discharge inks as is, without using diazo or catalyst for stencil hardening
• Can be used with Diazo 11 when extra sharpness is required for high resolution

• Red one-part pure photopolymer emulsion, no mixing required
• Approximately 4x faster than typical two part emulsion
• 47% solids content and medium viscosity, easy coating on all mesh counts
• Universally resistant: Solvent and waterbased ink resistant, yet easy to reclaim
• Recommended for use with discharge inks as is, without using diazo or catalysts for stencil hardening
• Can be used with Diazo 11 when extra sharpness is required for high resolution

• High Density Garment Printing with HSA water-based or plastisol inks, as well as glitter/crystalina printing through very coarse mesh
• One part pure photopolymer emulsion resistant to water-based and plastisol inks
• High solids content and viscosity enable easy production of stencils for high density printing, as well as being able to cover very coarse mesh
• High solids content (51%) and high viscosity 70,000 cPs for production of 1,000 micron thick stencils with simple wet on wet coating process
• Exposes 10X faster than typical two-part emulsions for fast exposure at high thickness
• Solvent & water resistant and designed for use with HSA water-based inks, as well as plastisol & UV

• Red one part pure photopolymer emulsion with universal ink resistance
• SBQ technology, exposes 6 times faster than two part emulsions and leaves no diazo stains
• Easy Reclaim
• 42% solids and high viscosity for easy coating and good bridging on all mesh counts
• Universally resistant, can be used with solvent based, UV, and water based inks, yet is easy to reclaim
• Recommended for use with discharge inks as is, without using diazo or catalyst for stencil hardening

• Blue one part pure photopolymer emulsion with universal ink resistance
• Exposes 8X faster than typical two part emulsions
• 45% solids and high viscosity for easy coating and good bridging on all mesh counts
• Universally resistant, can be used with solvent based, UV, and water based inks, yet is easy to reclaim
• Recommended for use with discharge inks as is, without using diazo or catalyst for stencil hardening
• Can be used with Diazo 11 when extra sharpness is required for high resolution

• Red, one-part photopolymer emulsion with universal ink resistance
• 8x exposure speed for rapid imaging on wide range of mesh counts
• Easy to reclaim
• 48% solids content & high viscosity for easy coating on wide range of mesh counts
• Fast exposing with wide latitude for high resolution stencils
• Resistant to water-base & discharge inks, simply post-expose for maximum durability, and no need for chemical hardener
• Designed to reclaim easily and for use with all automatic reclaim equipment as well as manual use

Lorem ipsum odor amet, consectetuer adipiscing elit. Parturient sollicitudin inceptos donec integer dapibus, odio pharetra senectus? Vivamus aliquet platea, augue torquent metus justo varius. 

• Red one-part photopolymer emulsion with universal ink resistance
• 10X exposure speed for rapid imaging on wide range of mesh counts
• Easy to reclaim
• 43% solids content & high viscosity for easy coating on wide range of mesh counts
• Fast exposing with wide latitude for high resolution stencils
• Resistant to water-base & discharge inks, simply post-expose for maximum durability, and no need for chemical hardener
• Designed to reclaim easily and for use with all automatic reclaim equipment as well as manual use

• Low viscosity one part photopolymer emulsion, compatible with industrial discharges
• Remarkable wet adhesion during the developing process
• Very high mechanical & chemical resistance
• Developed for Direct Light & Direct Laser imaging & exposure
• Excellent resolution for fine lines & half-tone printing
• Outstanding adhesion to nickel screens

• Blue water-based diazo emulsion
• Excellent adhesion to nickel screens
• Very high mechanical and chemical resistance
• Specifically designed for double squeegee top to bottom coating
• Excellent coating and cosmetic quality on all rotary screen mesh numbers

• Dual-cure emulsion for printing UV-cured, solvent-based and water-based inks on electric appliance glass, glass containers and bottles, automotive glass, architectural and decorative glass
• Excellent print definition on any mesh
• 39% solids content
• Low friction stencil surface prints fine details cleanly and improves durability when used with abrasive inks

• Dual-cure emulsion that resists UV-cured, solvent based, water based, and oil based inks, used to decorate flat glass - electrical appliance, automotive, architectural and decorative glass
• Uniform & consistent stencil thickness (a very important characteristic highly appreciated by the automotive glass printing segment)
• Low surface friction properties for improved abrasion resistance and longer stencil life
• 48% solids content and high viscosity for optimum mesh bridging with medium to low mesh counts

• Red/blue one-part pure photopolymer emulsion, no mixing required
• Approximately 3x faster than typical two part emulsions
• 42% solids content and medium viscosity, easy coating on all mesh counts
• Universally resistant: UV-cured, solvent-based and water-based UV-cured ink-resistant, yet easy to reclaim

• Blue one part pure photopolymer emulsion designed with high speed for use with DLE exposure systems in glass printing applications
• Solvent and water resistant and designed for use with UVcured, solvent or oil based inks used to decorate flat glass
• Post exposure recommended to increase screen durability when used with water based inks
• Exposes 15X faster than typical two part emulsions for maximum productivity
• Designed for use on medium to low mesh counts typically used to decorate automotive glass

• Fastest one part pure photopolymer emulsion designed to make screens with DLE exposure systems for flat glass printing
• Solvent and water resistant and designed for use with UV-cured, solvent or oil-based inks used to decorate flat glass
• Exposes 20X faster than typical two part emulsions for maximum productivity
• Designed for use on medium to low mesh counts typically used to decorate architectural glass

• Add to SBQ emulsion to maximize sharpness
• Easy to dissolve
• Good stability when stored in original container
• Consistent performance
• Does not affect easy stencil reclaiming

• Works as a catalyst with triple-cure emulsions (Ceramic HT, Textil HT, Vitrum HT) or makes a permanent, solvent-resistant and waterproof stencil
• Works as an emulsion hardener with water-resistant emulsions such as Textil DW  to make a more durable stencil

SAATI DCF Series Capillary Film is designed for use with all solvent based inks. It varies in color depending on micron thickness and comes in six different thicknesses.

Fast exposing solvent and water-resistant capillary film. Exposes three times faster than comparable diazo film. Long shelf life. Easy to reclaim. Can be used with solvent based, UV-Cured, plastisol and water-based inks.

Developed to meet the needs of the industrial printing market, specifically manufacturers of touch screen displays and solar cells, as well as membrane switches and graphic overlays. Provides wide exposure latitude with the sharpest edge definition, and boasts exceptional resistance to the aggressive solvents used during on-press cleaning.

Pre-sensitized high-density capillary film offered by SAATI, the leader in emulsion technology. Thik/Thik Plus Film features a specially formulated red photopolymer emulsion that ensures a faster exposure, consistent stencil thickness, and excellent printing results every time. Thik/Thik Plus Film is durable and a great time saver, enabling the production of thick stencils in one easy process.

Red, medium viscosity solids-resistant blockout

Blue, medium viscosity solvent-resistant blockout

Blue, high viscosity solvent-resistant blockout

Purple, high solids content water-resistant blockout

Purple, high solids content water-resistant blockout

red, solvent-resistant screen filler that also accelerates polyurethane adhesive curing times

red, solvent-resistant screen filler

• Fastest evaporating press wash
• Works on most inks
• VOC free

• Recommended for use with Solvent based, UV-Cured inks and 2-part inks
• Flash point 43ºC/110ºF
• Fast drying product that is highly effective on difficult to clean inks
• Can be used to remove pallet adhesives on press

• Press wash recommended for use with Solvent-Based, UV-Cured and Textile inks
• Flash point 62ºC/143ºF
• Contains no chlorinated solvents or toxic organic substances
• Compatible with automatic cleaning machines
• When used in automatic machines can be recycled through the vacuum distillation process
• Slower drying product that is highly effective on difficult to clean inks

• Recommended for use with Solvent-Based, UV-Cured and Textile inks
• Flash point 45ºC/113ºF
• Compatible with automatic cleaning machines
• Slower drying product that is highly effective on difficult to clean inks

• Recommended for use with Solvent-Based, UV-Cured and Textile inks
• Flash point 43ºC/109ºF
• Compatible with automatic cleaning machines
• When used in automatic machines can be recycled through the vacuum distillation process
• Mild Scent

• Recommended for use with Solvent-Based, UV-Cured and Textile inks
• Flash point 43ºC/109ºF
• Compatible with automatic cleaning machines
• When used in automatic machines can be recycled through the vacuum distillation process

• Textile Press Wash recommended for use with Plastisol and UV-Cured inks
• High flash point of 66ºC
• Low VOC <500g/L

• Recommended for use with Plastisol and UV-Cured inks
• Flash point 49ºC/120ºF
• Medium drying speed

• Textile Press Wash recommended for use with Plastisol inks
• Flash point 61ºC/142ºF
• Economical
• Will not lock up plastisol resistant only emulsions
• When wiped with cotton rag, masking tape will stick immediately

• Recommended for use with Plastisol inks
• Flash point 61ºC/142ºF
• Apple scent
• Economical
• Will not lock up plastisol resistant only emulsions
• When wiped with cotton rag, masking tape will stick immediately

• Recommended for use with solvent based and UV-Cured inks
• Flash point 43ºC/109ºF
• Versatile and with fast drying formula

• Recommended for use with Solvent based, UV-Cured inks and 2-part inks
• Flash point 165ºC/329ºF
• Slower drying product that is highly effective on difficult to clean inks

• Recommended for use with Solvent based, UV-Cured inks and 2-part inks
  Flash point 44ºC/112ºF
  Fast drying product that is highly effective on difficult to clean inks

• Recommended for use on all inks
• Flash point >94ºC/>200ºF
• Low VOC at 90g/L and complies with SCAQMD regulations
• Non-flammable

• Flash Point 148ºF (64ºC)
• For manual or automatic cleaning
• Emulsifies for easy water rinsing and avoids formation of ghost images
• High efficiency formula reduces product consumption
• Universal performance reduces the need for multiple ink removers

• Flash Point 150ºF (66ºC)
• Safe to use on emulsions that are plastisol resistant only
• Will not attack SAATI Chemicals CA Series Adhesives

• Flash Point 175ºF (79ºC)
• For manual or automatic cleaning
• Emulsifies for easy water rinsing and avoids formation of ghost images
• High efficiency formula reduces product consumption
• Universal performance reduces the need for multiple ink removers
• Can be re-applied after stencil removal to remove ghost images

• Flash Point >200ºF (93ºC)
• Low foam & low odor and can be used for manual or automatic cleaning
• Can be mixed with Remove ER6 and used as one-step ink & stencil remover solution
• Emulsifies for easy water rinsing and avoids formation of ghost images
• High efficiency formula reduces product consumption
• Universal performance reduces the need for multiple ink removers
• Can be re-applied after stencil removal to remove ghost images

• Flash Point >200ºF (93ºC)
• Low foam & low odor and can be used for manual or automatic cleaning
• Can be mixed with Remove ER6 and used as one-step ink & stencil remover solution
• Emulsifies for easy water rinsing and avoids formation of ghost images
• High efficiency formula reduces product consumption
• Universal performance reduces the need for multiple ink removers
• Can be re-applied after stencil removal to remove ghost images

• Flash point >200ºF (93ºC)
• Lower foam & low odor and can be used for manual or automatic cleaning
• Can be mixed with Remove ER products and used as one-step ink & stencil remover solution
• Emulsifies for easy water rinsing and avoids formation of ghost images
• Eliminates mesh stains when used to remove plastisol inks
• High efficiency formula reduces product consumption
• Universal performance reduces the need for multiple ink removers
• Can be re-applied after stencil removal to reduce ghost images

• Flash point >200ºF (93ºC)
• No foam & low odor and can be used for manual or automatic cleaning
• Can be mixed with Remove ER products and used as one-step ink & stencil remover solution
• Emulsifies for easy water rinsing and avoids formation of ghost images
• High efficiency formula reduces product consumption
• Universal performance reduces the need for multiple ink removers
• Can be re-applied after stencil removal to reduce ghost images

• Universal ink remover for both manual and automatic cleaning
• Economical formula
• Emulsifies for easy water rinsing and avoids formation of ghost images
• High efficiency formula reduces product consumption
• Universal performance reduces the need for multiple ink removers
• Can be re-applied after stencil removal to remove ghost images
• Low odor

• Flash point >200ºF (93ºC)
• No foam & low odor and can be used for manual or automatic cleaning
• Can be mixed with Remove ER products and used as one-step ink & stencil remover solution
• Emulsifies for easy water rinsing and avoids formation of ghost images
• High efficiency formula reduces product consumption
• Universal performance reduces the need for multiple ink removers
• Can be re-applied after stencil removal to reduce ghost images

• Ideal for garment and textile applications
• Works on all plastisol inks
• Use in spray or recirculating tanks

• Flash Point 145ºF (63ºC)
• Slightly viscous to improve cling to screen during application
• Low VOC at 113g/L
• High efficiency formula reduces product consumption
• Clean screens with water and easy rinsing formula

• Flash Point 135ºF (57ºC)
• High efficiency formula
• Works well manually or in automatic systems
• Significantly reduces ink staining
• Solubilize ink then rinse with water
• Low mesh staining

• Flash point 160ºF (71ºC)
• Pleasant scent
• Slightly viscous to improve cling to screen during application
• High efficiency formula reduces product consumption
• Clean screens with water and easy rinsing formula
• Low VOC’s at 289g/L

• Flash Point >200ºF (93ºC)
• Economical
• Slightly viscous to improve cling to screen during application
• Low VOC at 139g/L
• High efficiency formula reduces product consumption
• Clean screens with water and easy rinsing formula

• Flash Point 150ºF (66ºC)
• Removes the most stubborn and harshest inks
• Highly effective and can be reapplied to remove ghost image after stencil removal

• Flash Point >200ºF (93ºC)
• Works well on most inks used in graphic, electronic & industrial applications
• Low foaming and can be used for automatic cleaning as well as manual cleaning
• Low VOC at 333g/L

• Textile ink remover
• Flash Point >200ºF (93ºC)
• Slightly viscous to improve cling to screen during application
• Low VOC at 93g/L and complies with SCAQMD regulations
• Non-flammable

• Universal ink remover
• Flash Point >200ºF (93ºC)
• Low VOC at 75g/L and complies with SCAQMD regulations
• High efficiency formula reduces product consumption
• Universal performance reduces the need for multiple ink removers
• Highly effective and can be reapplied to remove ghost image after stencil removal

• Flash Point 143ºF (62ºC)
• HAPS-free
• High efficiency formula reduces product consumption
• Universal performance reduces the need for multiple ink removers

• Universal ink remover
• Flash Point >200ºF (93ºC)
• Non-flammable
• Zero VOC at 0g/L and complies with SCAQMD regulations
• High efficiency formula reduces product consumption
• Universal performance reduces the need for multiple ink removers
• Highly effective and can be reapplied to remove ghost image after stencil removal

• Universal ink remover recommended for use with Solvent-Based, UV-Cured and Textile inks
• Flash Point >80ºC / 176ºF
• Contains no chlorinated solvents or toxic organic substances
• GOTS-certified
• When used in automatic machines can be recycled through the vacuum distillation process
• Mild Odor

• Universal ink remover recommended for use with Solvent-Based, UV-Cured and Textile inks
• Flash Point >102ºC / 215ºF
• Biodegradable, Low VOC, and contains no aromatic hydrocarbons, chlorinated solvents or toxic organic substances
• When used in automatic machines can be recycled through the vacuum distillation process
• Odorless

• Ready to use gel emulsion remover
• Easy to apply by brush
• Smooth gel that spreads easily and stays put, for maximum effectiveness
• Contains built in degreaser that cuts through any ink/solvent residue to ensure fast and efficient stencil removal

• Concentrated emulsion remover powder that dissolves in water to produce stencil stripper solution
• Economical
• Highly concentrated product
• Recommended to be dissolved at 1% by weight in water for full strength working solution for spray application

• Liquid concentrated emulsion remover that includes powerful built-in degreaser
• Dilute 1:35 by volume, or 1:25 by weight to provide full strength working solution for spray application
• Very easy to dissolve and will not crystallize
• Degreaser cuts through any greasy film left after ink removal and this ensures fast and efficient stencil removal

• Liquid concentrated emulsion remover that mixes 1 part product with 4 parts water
• Economical product for spray application
• Very easy to dissolve and will not crystallize

• Economical
• Most concentrated liquid reclaimer
• Dilutes 1:80 by volume or 1:50 by weight to make full strength working solution for spray application
• Can be diluted up to 300:1 by volume or 200:1 by weight, depending on requirements for use in automated screen recycling systems
• Will not crystallize or block spray nozzles

• Super concentrated liquid emulsion remover
• Economical
• Highly concentrated liquid reclaimer
• Dilutes 1:40 by volume or 1:25 by weight to make a full strength working solution for spray application
• Can be diluted up to 150:1 by volume or 100:1 by weight, depending on requirements for use in automated screen recycling systems
• Will not block spray nozzles

• Low cost liquid concentrated emulsion remover
• Dilute 1:25 with water to provide working solution
• Easy to dissolve and will not crystallize
• Removes all types of emulsion or capillary film stencils

• Low cost liquid concentrated emulsion remover with built-in degreaser
• Dilute 1:25 with water to provide working solution
• Easy to dissolve and will not crystallize
• Removes all types of emulsion or capillary film stencils

• Concentrated emulsion remover used for dip tank reclaiming of textile screens
• Mix 1:10 with water for optimum results
• When mixed with SAATI Remove IR18, the solution is used as one-step process for ink and stencil removal
• Long lasting and economical

• Emulsion remover concentrate that is mixed with Gelative ER6, to make a reclaiming gel for textile screens
• Mix 1:1 with Gelative ER6 for optimum results as spray on ‘dip tank in a bottle’ process
• Easily applied by spray, or brush, and allows for batch reclaiming of multiple screens
• Stays put where applied for maximum effectiveness
• Fast acting and economical, no waste

• Produces clear stable gel when mixed with Remove ER6 and removes ink and emulsion in one easy step
• Works with all photo emulsions and capillary film
• Clings to screen for maximum efficiency
• Boosts cleaning power to minimize ghost image

• Ready to use liquid haze remover
• Removes the toughest stains
• Works in minutes
• Viscous cling to prevent run off and minimize waste
• Powerful formula is able to remove older stains

• Powerful ready to use liquid haze remover
• Removes the toughest stains
• Works in minutes
• Viscous cling to prevent run off and minimize waste
• Works without the irritation and ‘bite’ normally associated with high caustic products

• Ready to use liquid haze remover
• Remove the toughest stains
• Works in minutes
• Low odor during use with pressure washer
• Viscous cling to prevent run off and minimize waste
• Powerful formula is able to remove older stains
• Designed to work on both wet or dry screens

• Ready to use gel designed to remove diazo stains
• Combine with Remove IR for improved ink removal
• Can be left to dry on mesh and then reactivated with solvent for simplified batch cleaning of screens
• Low caustic formula will not pop screens

• Ready to use haze remover paste
• Strong yet gentle on mesh
• Smooth gel spreads easily
• Stable formula does not separate or darken
• Will not separate in can when used with wet brush

• Powerful fast acting gel that works in minutes
• One part, ready to use formula removes the toughest stains
• Low odor during use with pressure washer
• Fast and easy application with stainless steel scoop coater
• Non-drip and works only where applied

• Ready to use non-caustic gel
• Designed to remove emulsion and ink residue
• Apply by scoop coater for easy batch cleaning of screens
• Can be left on screen for extended periods and will not weaken mesh

• Pink, semi-viscous liquid/gel
• Non-caustic
• Mild cherry scent
• Effectively removes ink stain from most recent job
• Mild abrasive formula helps to speed stain removal

• Pink, viscous, water-based lotion
• Pleasant cherry scent
• Moisturizes skin while cleaning inks, oils and more
• Contains medium-grit abrasive to accelerate the removal of difficult soils

• Viscous light green water-based lotion
• Pleasant green apple scent
• Moisturizes skin while cleaning inks, oils and more
• Contains fine-grit abrasive to accelerate the removal of difficult soils