Product Portfolio

The classic sturdy and lightweight metal option

Technical Data Sheet - USA

For the textile printer who needs to focus on stencil production and printing, SAATI Stretched Screens are produced with the same high quality SAATI mesh that you are already used to.

Technical Data Sheet - USA

Blue two component polyurethane adhesive with a 30-50 minute mixed pot life to be mixed in small quantities as required, very high initial adhesion

Technical Data Sheet - EMEA+USA

Two component polyurethane adhesive with a 48 hour mixed pot life for maximum workflow flexibility, good initial adhesion

Technical Data Sheet - EMEA+USA

Red two component polyurethane adhesive with a 30-50 minute mixed pot life with maximum initial adhesion. Cures much more quickly when sealed with SAATI Finish WU-2

Technical Data Sheet - EMEA+USA

Red two component polyurethane adhesive with a 30-50 minute mixed pot life with maximum initial adhesion

Technical Data Sheet - EMEA+USA

Red two component polyurethane adhesive with a flexible 4-5 hour mixed pot life and good initial adhesion

Technical Data Sheet - EMEA+USA

Apply Direct Prep 1 to newly stretched screens in order to clean the mesh and create a uniform surface for more consistent coating, while roughening the mesh surface in order to enhance the grip of emulsion and films.

Technical Data Sheet - USA+EMEA

Two component polyurethane adhesive with a 48 hour mixed pot life for maximum workflow flexibility, good initial adhesion

Technical Data Sheet - USA+EMEA

Red two component polyurethane adhesive with a 30-50 minute mixed pot life with maximum initial adhesion. Cures much more quickly when sealed with SAATI Finish WU-2

Technical Data Sheet - EMEA+USA

No / Low Foam concentrated degreaser & wetting agent formulated for use in automated screen cleaning equipment

Technical Data Sheet - EMEA

Technical Data Sheet - USA

Direct Prep 4 is a powerful cleaning agent that can be used on new or recycled mesh, or even hard surfaces in the screen department

Technical Data Sheet - Global

• Highly water resistant diazo emulsion for use with plastisol and water based inks
• 42% solids content and medium viscosity
• Economical emulsion for apparel printing
• Can be hardened with SAATI Fixer 9 to produce a permanent waterproof stencil

Textil DW TDS - USA+EMEA

• Red pure photopolymer direct emulsion resistant to plastisol ink, abrasion and humidity
• Exposes 8x faster than a diazo or dual-cure emulsion
• 42% solids content and medium viscosity for easy coating and good bridging on wide range of mesh counts
• No mixing required and no diazo staining
• Water resistant when post exposed

Textil PV TDS - Global

• Blue one part pure photopolymer emulsion resistant to plastisol ink, abrasion and humidity
• Exposes 8X faster than typical two part emulsions
• 50% solids content and medium viscosity for fast build up and good bridging on wide range of mesh counts
• No mixing required and no diazo staining of mesh
• Water resistant when post exposed and can be used to print water based inks and adhesives

Textil PC Blue TDS - Global

• Emulsion for garment printing with plastisol ink, glitter printing, high-density printing
• Red one part pure photopolymer formula resistant to plastisol and high humidity
• High solids content (50%) and high viscosity 50,000 cPs for production of stencils up to 400 micron thick with simple wet-on-wet coating process
• Exposes 10X faster than typical two part emulsions for fast exposure at high build up

Textil PHW Red TDS - Global

• Lorem ipsum odor amet, consectetuer adipiscing elit.
• Parturient sollicitudin inceptos donec integer dapibus, odio pharetra senectus?
• Vivamus aliquet platea, augue torquent metus justo varius. 

SAATItex CTS3 TDS - Global - COMING SOON

• Red one-part photopolymer emulsion with universal ink resistance
• 10X exposure speed for rapid imaging on wide range of mesh counts
• Easy to reclaim
• 43% solids content & high viscosity for easy coating on wide range of mesh counts
• Fast exposing with wide latitude for high resolution stencils
• Resistant to water-base & discharge inks, simply post-expose for maximum durability, and no need for chemical hardener
• Designed to reclaim easily and for use with all automatic reclaim equipment as well as manual use

SAATItex PHU-HRX TDS - Global

The DLE is supplied as a vertical version and is customized to meet individual requirements. It was one of CST's first models to be sold and has been further developed over the years - this is a flagship model.

CST manufactures systems according to customer requirements in sizes from 2.0 x 2.0m up to 8.0 x 4.0m, or even larger upon special request. The resolutions range from 1000 to 2540 DPI.

Screens can be loaded from the front or sides, various screen weights can be used, and the loading/offloading can be automated.

CST Brochure

High efficiency pneumatic pump system that practically eliminates refill downtime and lessens the hand fatigue stemming from manual spray bottles.

Drum Dispensing Unit TDS - USA

• Highly chemically resistant brush surface for the application or spreading of every type of screen printing chemical before and after printing
• White plastic handle is fused to the brush without any adhesives
• Fusion of handle to brush means that no chemical can debond the pad from the handle
• Heavy duty handle encourages a motion that doesn’t put stress on the wrist joint
• High chemical resistance makes the scrub pad compatible with even the harshest haze/ghost removers

Screen Scrubber Pads TDS - USA

Red, medium viscosity solids-resistant blockout

SAATI Finish S1 TDS - Global

Blue, medium viscosity solvent-resistant blockout

SAATI Finish S2 TDS - Global

Blue, high viscosity solvent-resistant blockout

SAATI Finish S3 TDS - Global

Purple, high solids content water-resistant blockout

SAATI Finish W1 TDS - USA+EMEA

Purple, high solids content water-resistant blockout

SAATI Finish W3 TDS - USA+EMEA

Red, solvent-resistant screen filler that also accelerates polyurethane adhesive curing times

SAATI Finish WU2 A&B TDS - USA+EMEA

Red, solvent-resistant screen filler

SAATI Finish SU1 A&B TDS - EMEA

Yellow LED Safelights permit you to brightly illuminate the areas where you store, transport and prepare screens for exposure. With a light “airlock” it’s possible to work comfortably without compromising stencil quality. SAATI Yellow LED Safelights are the preferred solution

Yellow LED Safelight Bulbs TDS - Global

Safe light goggles are an essential tool for every screen printing business. Safe light goggles ignore the wavelengths that are safe for unexposed stencil material and only allow the wearer to see in the wavelengths that do affect them. Instantly verify the presence or absence of unsafe light wavelengths in the areas where you store, transport and prepare to expose unexposed screens, so you can take decisive action with Safe lighting as needed.

Safelight Goggles TDS - Global

Accurately count the number of threads per inch within +/-2 in mesh counts ranging from 22-528 TPI.

This is accomplished by placing one of the 2 included films (22-276 TPI and 274-528 TPI) onto your fabric and rotating the film until the moire pattern appears next to the mesh count.

Mesh Counter TDS - Global

Confirm the tension of your mesh during stretching, and at all subsequent stages to avoid printing with under-tensioned screens

Digital Tension Meter TDS - Global

Use gauge by laying it directly on the screen or film. A moiré pattern appears on the tool at the angle it sees.

Angle Determiner TDS - Global

The only analog tension meter in the world with all stainless steel hardened gears, and shock-proof industrial-grade internal gear movement

Newman Tension Meter TDS - Global

Use this digital gauge to measure the EOM of your screens prior to exposure so that your exposure program and eventual ink deposits will be correct

Positector 6000 Thickness Gauge TDS - USA+EMEA

Use this digital gauge to measure the EOM of your screens prior to exposure so that your exposure program and eventual ink deposits will be correct

Positector DFT Thickness Gauge TDS - Global

Use this digital gauge to measure the peaks and valleys of your stencil surface to understand if the surface is too rough or too smooth to create precise ink deposits

Roughness (Rz) Meter TDS - USA+EMEA

When diazo/dual-cure stencils are moist and are exposed in that condition, they suffer from loss of resolution, and any moist screen can also stick to vacuum glass. With a Moisture Meter, it is simple and quick to confirm that a coated screen is fully dried before subjecting it to an exposure program.

TQM Aquacheck TDS - Global

This small, light weight portable spectrophotometer is designed for easy operation and high precision for a variety of functions. It measures the wavelength and output interval of light sources in your screenmaking area - both the exposure equipment and ambient lighting

Spectrophotometer TDS - Global

SAATI’s 21 Step Guide is a day one priority for every screen printer across every application. This small tool is applied to the stencil material prior to exposure, and when developed tells you whether the stencil has over or under exposure, or is dialed in for the best print quality. Count the number of progressively darker steps of the calculator that have adhered to the mesh, and make one simple calculation to prepare a second test and confirm perfect stencil curing.

Take it one step further and apply the calculator to every screen you produce - you will know with certainty that every screen going to press is dialed in for high resolution and durability.

21 Step Guide TDS - Global

This handy guide is fixed to emulsion prior to exposure and upon developing reveals resolution and definition for 4 progressively shorter exposure times – 70%, 50%, 33% and 25% of the actual test. Compare the results between steps to make an informed decision about what result matches your exact needs.

Exposure Calculator TDS - Global

A compact and simple to read tool that confirms squeegee hardness for blades without a stated value, it also helps you identify squeegee that have softened, so you always go to press with the right blade for accurate printed results.

Rex H-1000 Durometer Gauge TDS - Global

This powerful handheld microscope allows you to check your halftones on substrates, to check whether details have narrowed or closed prior to printing, and to check the quality of the edge definition with up to 200x magnification

ViTiny 300 Plus Microscope TDS - Global

• Fastest evaporating press wash
• Works on most inks
• VOC free

Remove PW1 TDS - USA

• Recommended for use with Solvent based, UV-Cured inks and 2-part inks
• Flash point 43ºC/110ºF
• Fast drying product that is highly effective on difficult to clean inks
• Can be used to remove pallet adhesives on press

Remove PW7 TDS - Global

• Press wash recommended for use with Solvent-Based, UV-Cured and Textile inks
• Flash point 62ºC/143ºF
• Contains no chlorinated solvents or toxic organic substances
• Compatible with automatic cleaning machines
• When used in automatic machines can be recycled through the vacuum distillation process
• Slower drying product that is highly effective on difficult to clean inks

Remove PW13 TDS - EMEA

• Recommended for use with Solvent-Based, UV-Cured and Textile inks
• Flash point 43ºC/109ºF
• Compatible with automatic cleaning machines
• When used in automatic machines can be recycled through the vacuum distillation process
• Mild Scent

Remove PW30 TDS - EMEA

• Recommended for use with Solvent-Based, UV-Cured and Textile inks
• Flash point 43ºC/109ºF
• Compatible with automatic cleaning machines
• When used in automatic machines can be recycled through the vacuum distillation process
• Mild Scent

Remove PW36 TDS - EMEA

• Recommended for use with Solvent-Based, UV-Cured and Textile inks
• Flash point 43ºC/109ºF
• Compatible with automatic cleaning machines
• When used in automatic machines can be recycled through the vacuum distillation process

Remove PW40 TDS - EMEA

• Textile Press Wash recommended for use with Plastisol and UV-Cured inks
• High flash point of 66ºC
• Low VOC <500g/L

Remove PW3 TDS - USA

• Recommended for use with Plastisol and UV-Cured inks
• Flash point 49ºC/120ºF
• Medium drying speed

Remove PW4 TDS - USA

• Textile Press Wash recommended for use with Plastisol inks
• Flash point 61ºC/142ºF
• Economical
• Will not lock up plastisol resistant only emulsions
• When wiped with cotton rag, masking tape will stick immediately

Remove PW9 TDS - USA

• Recommended for use with Plastisol inks
• Flash point 61ºC/142ºF
• Apple scent
• Economical
• Will not lock up plastisol resistant only emulsions
• When wiped with cotton rag, masking tape will stick immediately

Remove PW10 TDS - USA

• Recommended for use on all inks
• Flash point >94ºC/>200ºF
• Low VOC at 90g/L and complies with SCAQMD regulations
• Non-flammable

Remove PW8 TDS - USA

• Ready to use gel emulsion remover
• Easy to apply by brush
• Smooth gel that spreads easily and stays put, for maximum effectiveness
• Contains built in degreaser that cuts through any ink/solvent residue to ensure fast and efficient stencil removal

Remove ER4 TDS - USA+EMEA

• Concentrated emulsion remover powder that dissolves in water to produce stencil stripper solution
• Economical
• Highly concentrated product
• Recommended to be dissolved at 1% by weight in water for full strength working solution for spray application

Remove ER1 TDS - USA+EMEA

• Liquid concentrated emulsion remover that includes powerful built-in degreaser
• Dilute 1:35 by volume, or 1:25 by weight to provide full strength working solution for spray application
• Very easy to dissolve and will not crystallize
• Degreaser cuts through any greasy film left after ink removal and this ensures fast and efficient stencil removal

Remove ER2 TDS - USA+EMEA

• Liquid concentrated emulsion remover that mixes 1 part product with 4 parts water
• Economical product for spray application
• Very easy to dissolve and will not crystallize

Remove ER5 TDS - USA+EMEA

• Economical
• Most concentrated liquid reclaimer
• Dilutes 1:80 by volume or 1:50 by weight to make full strength working solution for spray application
• Can be diluted up to 300:1 by volume or 200:1 by weight, depending on requirements for use in automated screen recycling systems
• Will not crystallize or block spray nozzles

Remove ER10 TDS - USA+EMEA

• Super concentrated liquid emulsion remover
• Economical
• Highly concentrated liquid reclaimer
• Dilutes 1:40 by volume or 1:25 by weight to make a full strength working solution for spray application
• Can be diluted up to 150:1 by volume or 100:1 by weight, depending on requirements for use in automated screen recycling systems
• Will not block spray nozzles

Remove ER13 TDS - USA+EMEA

• Super concentrated liquid emulsion remover
• Economical
• Highly concentrated liquid reclaimer
• Dilutes 1:40 by volume or 1:25 by weight to make a full strength working solution for spray application
• Can be diluted up to 150:1 by volume or 100:1 by weight, depending on requirements for use in automated screen recycling systems
• Will not block spray nozzles

Remove ER25 TDS - USA+EMEA

• Low cost liquid concentrated emulsion remover with built-in degreaser
• Dilute 1:25 with water to provide working solution
• Easy to dissolve and will not crystallize
• Removes all types of emulsion or capillary film stencils

Remove ER26 TDS - Global

• Concentrated emulsion remover used for dip tank reclaiming of textile screens
• Mix 1:10 with water for optimum results
• When mixed with SAATI Remove IR18, the solution is used as one-step process for ink and stencil removal
• Long lasting and economical

Remove ER6 TDS - USA+EMEA

• Emulsion remover concentrate that is mixed with Gelative ER6, to make a reclaiming gel for textile screens
• Mix 1:1 with Gelative ER6 for optimum results as spray on ‘dip tank in a bottle’ process
• Easily applied by spray, or brush, and allows for batch reclaiming of multiple screens
• Stays put where applied for maximum effectiveness
• Fast acting and economical, no waste

Remove ER6 Plus TDS - Global

• Produces clear stable gel when mixed with Remove ER6/ER6 Plus and removes ink and emulsion in one easy step
• Works with all photo emulsions and capillary film
• Clings to screen for maximum efficiency
• Boosts cleaning power to minimize ghost image

Gelative ER6 TDS - Global

• Pink, viscous, water-based lotion
• Pleasant cherry scent
• Moisturizes skin while cleaning inks, oils and more
• Contains medium-grit abrasive to accelerate the removal of difficult soils

Remove HC8 TDS - Global

• Viscous light green water-based lotion
• Pleasant green apple scent
• Moisturizes skin while cleaning inks, oils and more
• Contains fine-grit abrasive to accelerate the removal of difficult soils

Green Apple Hand Cleaner TDS - Global

The MBX Metal Blaster powers specialized wire brush belts that quickly strip epoxy, mesh and ink from aluminum screen frames. The cleaned surface is perfectly textured for bonding new screen mesh.

MBX Tool TDS - USA

Use the squeegee scraper to spread adhesives, blockouts and screen fillers. Available in 2 & 6" widths (5 & 15 cm).

Brushes for applying polyurethane adhesives during the screen stretching phase.

Brushes for spreading reclaim chemicals and screen scrubbing.