SAATI Textile Emulsion

• Highly water resistant diazo emulsion for use with plastisol and water based inks
• 42% solids content and medium viscosity
• Economical emulsion for apparel printing
• Can be hardened with SAATI Fixer 9 to produce a permanent waterproof stencil

• Highly water resistant diazo emulsion for use with plastisol and water based inks in flat textile printing, garment printing
• 41% solids content and medium viscosity
• Most economical emulsion for apparel printing
• Can be hardened with SAATI Fixer 9 to produce a permanent waterproof stencil

• Diazo emulsion for use with plastisol and water based inks
• 42% solids content and medium viscosity
• Faster exposure (60%) than is normally required for this type of emulsion
• Economical emulsion for apparel printing
• Can be hardened with SAATI Fixer 9 to produce a permanent waterproof stencil

• Blue triple-cure emulsion for printing plastisol and water based inks
• High resolution and definition
• Very easy to reclaim before use of hardener
• Can be catalyzed with SAATI Chemicals Fixer 9 to produce a permanent water proof stencil
• 48% solids and high viscosity for easy coating on wide range of mesh counts

• Low odor blue triple-cure emulsion for printing plastisol and water based inks
• High resolution and definition
• Very easy to reclaim before use of hardener
• Can be catalyzed with SAATI Chemicals Fixer 9 to produce a permanent water proof stencil
• 48% solids and high viscosity for easy coating on wide range of mesh counts
• Up to double the exposure speed of Textil HT

• Red pure photopolymer direct emulsion resistant to plastisol ink, abrasion and humidity
• Exposes 8x faster than a diazo or dual-cure emulsion
• 42% solids content and medium viscosity for easy coating and good bridging on wide range of mesh counts
• No mixing required and no diazo staining
• Water resistant when post exposed

• Blue one part pure photopolymer emulsion resistant to plastisol ink, abrasion and humidity
• Exposes 8X faster than typical two part emulsions
• 50% solids content and medium viscosity for fast build up and good bridging on wide range of mesh counts
• No mixing required and no diazo staining of mesh
• Water resistant when post exposed and can be used to print water based inks and adhesives

• Very high speed one part photopolymer emulsion designed for projection imaging in flat continuous textile printing plastisol and water based inks
• 36% solids content and low viscosity
• Exposes 30X faster than typical two part emulsions for maximum productivity with DLE computer to screen systems
• Very good resistance to water based inks and can be used for apparel printing as well as flat textile yard goods
• No chemical hardening required and easy to reclaim

• Emulsion for garment printing with plastisol ink, glitter printing, high-density printing
• Red one part pure photopolymer formula resistant to plastisol and high humidity
• High solids content (50%) and high viscosity 50,000 cPs for production of stencils up to 400 micron thick with simple wet-on-wet coating process
• Exposes 10X faster than typical two part emulsions for fast exposure at high build up

• Red one part pure photopolymer emulsion with universal ink resistance
• Exposes 8X faster than typical two part emulsions
• 45% solids and high viscosity for easy coating and good bridging on all mesh counts
• Universally resistant, can be used with solvent based, UV, and water based inks, yet is easy to reclaim
• Recommended for use with discharge inks as is, without using diazo or catalyst for stencil hardening
• Can be used with Diazo 11 when extra sharpness is required for high resolution

• Blue one part pure photopolymer emulsion with universal ink resistance
• Exposes 8X faster than typical two part emulsions
• 45% solids and high viscosity for easy coating and good bridging on all mesh counts
• Universally resistant, can be used with solvent based, UV, and water based inks, yet is easy to reclaim
• Recommended for use with discharge inks as is, without using diazo or catalyst for stencil hardening
• Can be used with Diazo 11 when extra sharpness is required for high resolution

• Red one-part pure photopolymer emulsion, no mixing required
• Approximately 4x faster than typical two part emulsion
• 47% solids content and medium viscosity, easy coating on all mesh counts
• Universally resistant: Solvent and waterbased ink resistant, yet easy to reclaim
• Recommended for use with discharge inks as is, without using diazo or catalysts for stencil hardening
• Can be used with Diazo 11 when extra sharpness is required for high resolution

• High Density Garment Printing with HSA water-based or plastisol inks, as well as glitter/crystalina printing through very coarse mesh
• One part pure photopolymer emulsion resistant to water-based and plastisol inks
• High solids content and viscosity enable easy production of stencils for high density printing, as well as being able to cover very coarse mesh
• High solids content (51%) and high viscosity 70,000 cPs for production of 1,000 micron thick stencils with simple wet on wet coating process
• Exposes 10X faster than typical two-part emulsions for fast exposure at high thickness
• Solvent & water resistant and designed for use with HSA water-based inks, as well as plastisol & UV

• Red one part pure photopolymer emulsion with universal ink resistance
• SBQ technology, exposes 6 times faster than two part emulsions and leaves no diazo stains
• Easy Reclaim
• 42% solids and high viscosity for easy coating and good bridging on all mesh counts
• Universally resistant, can be used with solvent based, UV, and water based inks, yet is easy to reclaim
• Recommended for use with discharge inks as is, without using diazo or catalyst for stencil hardening

• Blue one part pure photopolymer emulsion with universal ink resistance
• Exposes 8X faster than typical two part emulsions
• 45% solids and high viscosity for easy coating and good bridging on all mesh counts
• Universally resistant, can be used with solvent based, UV, and water based inks, yet is easy to reclaim
• Recommended for use with discharge inks as is, without using diazo or catalyst for stencil hardening
• Can be used with Diazo 11 when extra sharpness is required for high resolution

• Red, one-part photopolymer emulsion with universal ink resistance
• 8X exposure speed for rapid imaging on wide range of mesh counts
• Easy to reclaim
• 48% solids content & high viscosity for easy coating on wide range of mesh counts
• Fast exposing with wide latitude for high resolution stencils
• Resistant to water-base & discharge inks, simply post-expose for maximum durability, and no need for chemical hardener
• Designed to reclaim easily and for use with all automatic reclaim equipment as well as manual use

Lorem ipsum odor amet, consectetuer adipiscing elit. Parturient sollicitudin inceptos donec integer dapibus, odio pharetra senectus? Vivamus aliquet platea, augue torquent metus justo varius. 

• Red one-part photopolymer emulsion with universal ink resistance
• 10X exposure speed for rapid imaging on wide range of mesh counts
• Easy to reclaim
• 43% solids content & high viscosity for easy coating on wide range of mesh counts
• Fast exposing with wide latitude for high resolution stencils
• Resistant to water-base & discharge inks, simply post-expose for maximum durability, and no need for chemical hardener
• Designed to reclaim easily and for use with all automatic reclaim equipment as well as manual use

• Low viscosity one part photopolymer emulsion, compatible with industrial discharges
• Remarkable wet adhesion during the developing process
• Very high mechanical & chemical resistance
• Developed for Direct Light & Direct Laser imaging & exposure
• Excellent resolution for fine lines & half-tone printing
• Outstanding adhesion to nickel screens

Lorem ipsum odor amet, consectetuer adipiscing elit. Parturient sollicitudin inceptos donec integer dapibus, odio pharetra senectus? Vivamus aliquet platea, augue torquent metus justo varius.