SAATI Frame Adhesives

Blue two component polyurethane adhesive with a 30-50 minute mixed pot life to be mixed in small quantities as required, very high initial adhesion

Two component polyurethane adhesive with a 48 hour mixed pot life for maximum workflow flexibility, good initial adhesion

Red two component polyurethane adhesive with a 30-50 minute mixed pot life with maximum initial adhesion

Red two component polyurethane adhesive with a 30-50 minute mixed pot life with maximum initial adhesion

Characteristics

• Two-component polyurethane adhesive
• Red with medium viscosity for coarse to medium mesh counts
• Mounts screen mesh onto aluminum, steel, iron, plastic-coated and wood frames
• Can be thinned with dry acetone for use with higher mesh counts

Features

• Maximum initial adhesion allows screens to be removed from the stretching system only minutes after applying
• Maximum resistance to solvents, heat and automatic cleaning machines

Benefits

• Outperforms all other polyurethane adhesives in adhesion and resistance
• Superior flexibility polyurethane adhesive prevents cracking
• Quicker drying time than other urethane adhesives saves time in stretching

Red two component polyurethane adhesive with a flexible 4-5 hour mixed pot life and good initial adhesion

Clear spreadable adhesive with no mixing, available in three viscosities, that cures instantly with the application of Ultrafix CA Activator (spray can or pump)

Characteristics

• Spray-activated cyanoacrylate adhesives
• Mounts screen mesh onto aluminum, steel, iron, plastic-coated, and wood frames
• Available in three viscosities — Ultrafix CA50, CA100, and CA150

Features

• Cures instantly with spray activation
• Requires no mixing
• Good resistance to water and solvents

Benefits

• Instant cure and no mixing speeds up screen production
• Reaches peak performance immediately upon curing
• Can be removed from stretching system and pressed into production immediately

Activator for freshly applied Ultrafix CA Series adhesives

• Instantly cure Ultrafix CA adhesives
• Immediately enter the next step of the screen making process
• Available in both Spray and Pump

• Remove Ultrafix adhesive residue from screen printing frames and other hard surfaces
• Available in liquid and convenient gel form