All SAATIstyle® have been tested in accordance with UNI EN ISO 12543-4:2022 (test method for durability) no delamination nor bubble*.
RECOMMENDATION
When handling the fabric, it is recommended to always take care of the material to avoid any contamination that could stain the fabric. We also recommend testing the compatibility between the fabric and any materials that come into contact with it. The choice of the interlayer, which should be a minimum of 0.76mm both above and below the fabric, must be made based on the desired qualities such as resistance to humidity or mechanical stress.
To ensure greater insulation, we suggest leaving a 10mm perimeter without fabric to achieve better sealing and to mask the edge of the glass with an outer profile.
When cutting the fabric, it is important to ensure that all shapes are cut in the same direction. This is because the fabric has a directional pattern which is evident during lamination.
The fabric can be cut either cold or hot. In the latter case, we recommend avoiding excessively high temperatures to prevent burn marks on the edge.
It is important to note that the glass processing company is ultimately responsible for the lamination process.
STORAGE
All SAATIstyle® materials must be kept in a dry and clean indoor environment with no direct exposure to sunlight. To avoid leaving impressions on materials, they must be stored horizontally within bubble wrap and never stacked. Always handle with clean, lint-free gloves.
)
