SaatiChem Finish blockouts/screen fillers offer both high performance and user friendliness. Finish blockouts contain no solvents and provide increased filling power. All have pleasant-smelling formulations and are non-hazardous and biodegradable. Finish blockouts spread smooth and uniformly for optimum drying and filling. Use to cover open mesh areas and pinholes.
SAATICHEM BLOCKOUTS FINISH S1 Our most popular and economical blockout – Red, water-based liquid blockout – For use with solvent-based, UV-cured, and plastisol ink – Remove with water FINISH S2 Increased filling power – Blue, water-based liquid blockout – Increased filling power and more resistance to breakdown in high-stress printing such as with cylinder presses – For use with solvent-based, UV-cured, and plastisol ink – Remove with water FINISH S3 Highest Viscosity Finish S Product – High viscosity version of Finish S2 – For optimum results on low mesh count screens. FINISH SU-1 A+B Two component polyurethane lacquer with perfect adhesion to emulsion and fabric – Used for reinforcing engraved screens – Can be used to make permanent screens with negative reverse process – Completely cures in 24 hours to produce waterproof stencils with high chemical resistance – Replaces TK23 & RD26 screen coating resist FINISH W1 Unique reclaimable, waterbased blockout resistant to water and solvent – Unlike other water-based blockouts, offers superior water resistance simply upon drying – Resistant to water-based, plastisol, UV-cured and solvent-based ink – Very high solids content offers increased durability – Can be removed with emulsion reclaiming chemicals and a pressure washer Finish blockouts are available in 1-quart, 1-gallon, 5-gallon and 50-gallon containers. POLY SQUEGE (SCRAPERS) Available in 2-inch and 6-inch sizes. TAPES BLOCKOUT/MASKING TAPES CLOTH-BACKED ADHESIVE TAPE This very durable, plastic-coated tape produces a strong bond and excellent solvent and water resistance. Its backing is poyethylene-coated cloth. Constructed with an extra heavy layer of natural rubber adhesive, it endures numerous screen recyclings. Originally designed for demanding industrial applications such as construction and waterproof packaging, our cloth-backed adhesive tape is extremely durable. Available in 2-inch and 3-inch widths on 60-yard rols . Quantity discounts are available on single or multiple cases (2-inch widths , 24 rolls per case , 3-inch widths ,16 rolls per case). MAGI-BLUE™ TAPE (R TAPE) A blue solvent-resistant, polymer tape that is backed with Mylar plastic and used mainly as a blockout tape. Magi-Blue Tape will not leave an adhesive residue when removed from the screen. It is resistant to all solvents, alcohols and acids. Available in a 2-inch width on 36-yard rolls (36 rolls in a case) and in a 3-inch width on 36-yard rolls (24 rolls in a case). Quantity discounts are available. SPLIT-LINER TAPES BLUE & WHITE LINER TAPE Designed for metal and wood frames. Color-coded, the white area contains the adhesive, while the blue is a nonadhesive area. Of its 4-inches in width, 21⁄2-inches are adhesive backed, while the remainder has a predominantly nonadhesive backing. However, intermediate 1⁄4- wide strips are placed approximately every 2 inches within this non-adhesive area to attach the tape securely to the frame, and still allow easy removal. Available in a 4-inch width on 60-yard rols (18 rols per case). WHITE SPLIT-LINER TAPE A durable white split-liner polyethylene tape with the same proven adhesive as Saati’s Magi-Blue Tape. To use, peel off one-half of the liner and adhere this exposed half around the inside perimeter of the screen. Then apply the linered-half of the tape against the frame rails, forming a dam against ink penetration. Screen retensioning can occur with the White Split-Liner tape in place. When removal is desired, it peels off easily in one pull and leaves no adhesive residue. Available in 2-inch and 3-inch widths on 55-yard rolls. Also available as clear tape TEXTILE PALLET/PLATEN PROTECTION 4300 Series & 4350 Series This tape is used as a protectant of the pallet or platen, with spray adhesive used over it. Instead of wiping down the pallet periodically to remove lint with solvents, an initial layer of protective sheeting is placed on the pallet. Once there is a considerable buildup of lint affecting print quality, simply pull off one sheet and instantly you have a clean surface again. Depending on the type of shirt, especially fleece, lint can build-up rather quickly. Use 4300 series for flash applications and 4350 series for non-flash applications. Available in 18” and 24” wide by 100 yard rolls.